CALL US: (65) 6746 6411 | (65) 6746 6412
Menu
A versatile range of high-quality paints tailored for both residential and industrial needs. Dragon Paint delivers products that combine innovation, durability, and a wide spectrum of colours to meet the demands of modern Singaporean homes and businesses.
*For All Products: Ensure good ventilation during application and drying of paint. | Avoid direct contact with sensitive skin. | Use appropriate personal protective equipment.
We manufactured Top Quality Fluorescent Paint for Industrial use.
A finishing coat over primed wood and metal surfaces for interior use.
SPECIFIC GRAVITY 1.12 g / cm3
PACKING SIZE 5 litres and 1 litres
RECOMMENDED UNDERCOAT Dragon Undercoat White
SHELF LIFE Up to 24 months in a tightly sealed container.
Download the Brochure here.
An one-component quick drying acrylic-based paint which cures by air oxidation with good durability and good anti-fungus properties.
Weather resistant
As a decorative paint for primed wooden and metal surfaces for both
Interior and Exterior:
Iron pipe
Metal grill
Machinery
Railings
Metal door frame
Window frame
Metal cabinets
TYPE: Solvent-based acrylic resin enamel
COLOUR: A wide range of decorative colours as per colour card
FINISH: High Gloss
A thin black bitumen priming solution designed to penetrate and seal porous surfaces to provide and prepare a base for waterproofing protective systems.
Can be applied to many substrates including metal, slate, concrete, asbestos cement and lightweight concrete screeds, prior to the application of many Bituminous materials including torch-on and self adhesive bituminous membrane.
To seals surfaces prior to further waterproofing treatment; it may impart a degree of waterproofness until further work can be carried out.
Other applications include anti-corrosion coating for metal surfaces.
PREPARATION
Surfaces must be dry and clean; free from dust, dirt, grease, moss, lichen or any other foreign matter.
APPLICATION
Bitumen Solution must be brush applied or spray applied to dry surfaces. Ensure that only an even thin coating is applied. Ensure the solution has fully penetrated the substrate. Prime twice if substrate is porous. Stir well before use. Allow for the solvent to evaporate before application of other materials.
CLEANING TOOLS
Spillage and tools should be cleaned with Kerosene or white spirit.
An ultra-hard, scratch resistant finish that allows you to create a unique writable-erasable surface. It turns virtually any interior surface into a chalkboard.
PREPARATION
Surfaces must be dry and clean; free from dust, dirt, grease, moss, lichen or any other foreign matter.
APPLICATION
Ensure the solution has fully penetrated the substrate. Prime twice if substrate is porous. Stir well before use. Avoid excessive brushing or rolling. Use light, even strokes to ensure an even flow and the smoothest finish.
CLEANING TOOLS
Spillage and tools should be cleaned with white spirit or with soap and water.
Long-term protection for steel, thanks to the cathodic action between the metallic zinc in the coating and the steel surface.
Cold Galvanizing provides long term protection to steel because of the cathodic (galvanic) action between the steel and the metallic zinc in the coating. This action prevents rust from developing under Cold Galvanizing. It also produces a self- healing mechanism where the Cold Galvanizing is scratched; zinc oxides and carbonates form in the scratch and effectively reseal it.
It is specially designed as a primer and finishes for old and new substrates.
Use for touch-up and repair to damaged galvanized steel, galvanized ducts, fences, gutters, trucks, trailers, and more.
COLOUR
Silver
Matt finish for wooden and metal surfaces, offering excellent weathering resistance and anti-fungus properties.
An oil-modified alkyd resin-based paint which cures by air oxidation with good durability and good anti-fungus properties.
As a decorative paint for primed wooden and metal surfaces for both interior and exterior:
DESCRIPTION
Dragon Enamel Matt is an oil-modified alkyd resin-based paint which cures by air oxidation with good durability and good anti-fungus properties.
COLOUR
Full range of decorative colours as per colour card
FINISH
Matt
A versatile long oil alkyd resin-based paint which cures by air oxidation with good durability and good anti-fungus properties.
As a decorative paint for primed wooden and metal surfaces forboth interior and exterior:
DESCRIPTION
Dragon Enamel Matt is an oil-modified alkyd resin-based paint which cures by air oxidation with good durability and good anti-fungus properties.
COLOUR
Full range of decorative colours as per colour card
N.C. based Primer or Matt/Gloss finish, with the combination of special resins to give high build & durable performance coating.
COLOUR
Standard colours and other colours available upon request.
Primer or Topcoat for all kinds of substrates
A strong paint remover that strips all solvent based decorative and many industrial coating products.
Used to strip previously painted/varnished wood, plaster and metal surfaces. Removes most catalysed finishes.
COLOURS
Milky/ Cloudy
Ready for use with brush and roller.
Apply generously.
Thinning not required. Clean up/rinse with water then wash in Mineral Turpentine.
An one-component quick drying alkyd-based primer. Can be used as primer or mid coat in atmospheric environments.
Suitable for properly prepared carbon steel, aluminium and wooden substrates.
For protection of metal surfaces under mild conditions ie. inland condition with non-corrosive atmosphere such as:
TYPE
Solvent-based alkyd resin primer
COLOUR
Grey
FINISH
Matt
Dragon Red Oxide Primer is an one-component quick dry alkyd-based primer for the protection of metals under mildly corrosive conditions.
High solid content
Adhesion
Corrosive property
For protection of metal surfaces under mild conditions ie. inland condition with non-corrosive atmosphere such as:
TYPE
Solvent-based alkyd resin primer
COLOUR
Iron Oxide Red
FINISH
Matt
A tough, fast-drying and weather-durable coating formulated to withstand wear for road and floor marking.
For coating on:
TYPE
Modified chlorinated rubber resin with thermoplastic property.
A high opacity and high solid undercoat that will effectively hide the substrate and impart a good film build to the overall coating system. Widely used as an undercoat over timber, metal.
Specially designed undercoat for appropriately primed metals and wood such as:
COLOUR
Matt White
This product is a decorative wood varnish for new and old wooden furniture and door surfaces, which enhances the natural grain of wood.
As a decorative coat which provides excellent durability for old and new timber surfaces e.g.
TYPE
Solvent-based alkyd resin paint
COLOUR
Clear
FINISH
Gloss
An excellent penetrating oil-based wood preservative which penetrates into the wood as an active barrier against wood-rot, fungal decay and termites. Water repellant and anti-insecticidal properties.
COLOUR
Clear and Brown
For application to all new and existing external and internal wooden surfaces requiring protection from insect and water damage. Recommended for use on
Dragon Anti-Rust Black Primer is an one-component quick dry rust inhibitor primer for the protection of metals under mildly corrosive conditions.
For protection of metal surfaces under mild conditions ie. inland condition with non-corrosive atmosphere such as:
TYPE
Solvent-based alkyd resin primer
COLOUR
Black
FINISH
Matt
Absolutely! We understand that specific projects may require custom colours to match branding or particular safety standards. We provide custom colour mixing services for both small and large industrial orders. Simply get in touch with our consultants, and we’ll work with you to develop the perfect shade for your project.
Our minimum order quantity (MOQ) varies depending on the type of product and the scope of the project. For most of our industrial coatings, the MOQ is 20 litres per colour. However, we are flexible for large projects and can cater to bulk orders. Contact us to discuss your specific requirements.
For in-stock items, we can typically fulfil orders within 3 to 5 business days. Custom or specialised orders, such as custom colour mixes, may take a little longer, typically 5 to 10 business days, depending on the complexity and quantity. For urgent projects, we recommend reaching out early so we can prioritise and meet your deadlines.
Our industrial paints and coatings meet various international standards, including ISO 9001 and ISO 14001 for quality management and environmental compliance. Additionally, many of our products are marine-certified and adhere to industry-specific regulations. For specific product certifications, feel free to reach out to our team.
